- Other Seaward Sites:
)
Ideal for improving productivity and efficiency in low to medium volume testing
Developed specifically to affordably offer some of the productivity and efficiency benefits associated with sophisticated high-end equipment.
Unlike typical in-service PAT testers, this product offers the correct flash/hipot test to meet the CE and international requirments for routine product testing during manufacturing. In-service PAT testers have the test output limited making them unable to meet this legislatory requirement for use in routine production line testing. If you require further clarification on this point, why not call Clare and we will be happy to give clear and concise examples taken from over 50 years of dedicated service to the manufacturing industry.
SafeTest Manufacturing can be used as a simple manual tester or with varying degrees of automatic test sequencing and performs earth bond, insulation resistance, flash/hipot, leakage, short-to-line and run/load tests.
Easy to operate with via full QWERTY keypad and or barcode scanner, and includes full on screen user instructions. The new SafeTest instrument has been designed to meet the needs of manufacturers that require a range of fundamental safety tests to be carried out on a variety of electrical and electronic products.
All tests are individually user selectable and an internal memory has the capacity to store the results of 6,000 tests. The new tester also comes with an optional safety label printer that enables the automatic production of test tags, labels and test reports. Clever use of the optional barcode scanner for product identification and tester configuration, enables this product to be integrated easily into a typcial ISO quality control system.
Special safety interlocks and protection routines provide enhanced operator safety and a full range of test station accessories can also be supplied, including warning beacons. The design of the test environment is an area that Clare is considered to be an expert. We can offer best practive examples from our diverse knowledge of test applications, so if in doubt why not give us a call.
Some Common Standards that SafeTest Manufacturing will test to:
IEC/EN/UL/CSA 60335 – Household and similar electrical appliances
IEC/EN/UL/CSA 60065 – Audio visual and similar electronic equipment
IEC/EN/UL/CSA 60950 – Information technology equipment
BS EN/SS EN 50116 - Information technology equipment, routine testing
IEC/EN/UL/CSA 61010 – Electrical equipment for measurement, control, and lab use
Visual Check
Prompts user to perform visual check on the product’s case, power lead and fuse.
Earth Continuity / Screen Test
Output Currents: 25A, 10A, 4A, 100mA AC into short circuit
Test Voltage: 6V rms open circuit
Ranges: 0.04 – 20Ω
Measuring Range: 100k – 50MΩ
Test Voltage: 250V, 500V DC
Flash / HiPot
Voltage Class I: 1500V rms
Voltage Class II: 3000V rms
Range: 0.05mA – 10.00mA
Substitute Leakage
Voltage: 40V as nominal at 230V / 110V supply
Range: 0.1 – 20mA
Load Test
Load: 0 – 4.2kVA
Leakage
Range: 0.1 – 10mA
Touch Leakage
Range: 0.1 – 2.0mA
Polarity
.jpg&width=80)
